FEA Forums » Ansys Forum



Design World

•TRD Manufacturing Introduces the MH Series and TAS Cylinders

•MK24 Series Reed Sensors

•Bebco EPS® 6000 Series Purge/Pressurization System from Pepperl+Fuchs

•5 mm Buzzers Ideal for Mobile Equipment Applications

•CARLO GAVAZZI certified to ISO 14001:2004

Water tank simulation

  • Started 1 year ago by rashied : : Current there are 3 posts :
    : Latest reply from kameshwarangopinathan :

  1. Author

    Message

    Posted 2 weeks ago #

  2. rashied
    Member

    i want to model a tank contains water, and to computer the hydrostatic pressure by ansys,
    hence the stresses induced on the tank wall, I used element type Fluid79 for the water and plane42 for the tank wall,
    the run gives no results while i defined water density and i give a very small value for the elastic modulus for the water, as recommended by Ansys Help,
    the model is axisymmetric about the Y axis, and the elements were drawn in the positive direction for x & Y axes.

    please advise how to get the pressure

    Posted 1 year ago #

  3. tuongbui
    Member

    I am simulating water tank in ansys too. I used FUID79 and BEAM3 as main elements for my tank, but i couldn't create FSI for them. Plz helps me as soon as possible!!!

    Posted 2 months ago #

  4. kameshwarangopinathan
    Member

    do u use the equation to apply the hydrostatic pressure

    Posted 1 week ago #

RSS feed for this topic


Reply

You must log in to post.